3LPE mkpuchi mkpuchi

3LPE mkpuchi ọkpọkọ(3-Layer Polyethylene) na-ejikọtaFBE+ copolymer adhesive + polyethylene (PE) n'ime usoro atọ{2} oyi akwa maka ọkpọkọ eli na mmiri mmiri, na-eje ozi dị ka ihe ngwọta nchebe corrosion nke mpụga. Ọ na-agwakọta ngwakọta - bonded epoxy (FBE) primer maka electrochemical resistance, acopolymer adhesive for strong bonding, na mpụta polyethylene (PE) oyi akwa maka igwe na gburugburu ebe obibi nchebe. Sistemu a na-ewepụta ogologo oge dị elu ma e jiri ya tụnyere otu mkpuchi oyi akwa{{6}, na-eme ka ọ bụrụ foil, gas, mmiri na pipeline kpo oku kacha amasị ya n'ime ala na-akpa ike, ngafe ala mmiri na mpaghara mmiri.

Nke a 3LPE mkpuchi ọkpọkọ na-akọwakarị dị ka3LPE pipeline mkpuchimaka ahịrị dị n'ikpere mmiri e liri, ngafe osimiri, na akụkụ nke dị nso ebe kemịkalụ ala, mmiri mmiri na njikwa abrasion nwere ike imebi ihe mkpuchi ihe nkiri ma ọ bụ nke siri ike{{0}.

Ngwakọta -Epoxy jikọtara ọnụ (FBE)

Na-enye nrapanye ozugbo na elu igwe mgbe mgbawa abrasive gasịrị.

Ọrụ

Nguzogide nkwụsị nke cathodic dị oke egwu, dị oke egwu maka pipeline na-eji CP (nchebe cathodic).

Nkwụsi ike nke kemịkalụ na gburugburu acidic na alkaline.

Adhesive Copolymer

Ọrụ dị ka àkwà mmiri jikọtara ọnụ n'etiti FBE primer na elu PE jaket.

Ezubere iji guzogide mgbasawanye okpomọkụ na nrụgide ala na-enweghị delamination.

Na-akwalite ike bee na nguzogide shii, ọkachasị n'okpuru nrụnye igwe ma ọ bụ HDD (Ntụziaka kwụ ọtọ).

Na-eguzogide imi mmiri na-ekpo ọkụ, na-eme ka iguzosi ike n'ezi ihe n'usoro n'ime iru mmiri na apiti.

Polyethylene (PE) jaket

Na-enye ike nke igwe: nguzogide mmetụta, njikwa abrasion, yana nchebe pụọ na mmebi azụ.

Na-arụ ọrụ dị ka ihe mgbochi mmiri megide mmiri dị n'ime ala, mmiri osimiri, na mmetọ ala.

Dị na MDPE (Ọkara njupụta) na HDPE (Elu njupụta) akara ule dabere na oru ngo ọnọdụ.

Ogologo - nkwụsi ike UV na ntachi obi mgbe ekpughere ya n'oge ntinye ma ọ bụ nchekwa.

Ọnụ, akwa atọ ndị a na-etolite sistemu mmekọrịta: FBE na-ahụ maka mgbochi{{0} corrosion, nrapado na-echekwa njikọ, yana jaket PE na-echebe pipeline pụọ na ihe egwu na-arụ ọrụ na gburugburu ebe obibi.

Maka RFQ na ntinye akwụkwọ ọrụ, aNkọwa mkpuchi 3LPE PDFenwere ike ịnye ya na arịrịọ, gụnyere gụnyere nchịkọta usoro mkpuchi, ndepụta nyocha, na ndekọ achọrọ maka ịnatamgbe akọwapụtara na PO/ITP.

3LPE Vs FBE

• 3 LPE: Ihe mkpuchi mpụga atọ{{0} oyi akwa (FBE + adhesive + PE) na-ebugaike n'ibu nchebemegide mmetụta, abrasion, na nrụgide ala, gbakwunyere ihe mgbochi mmiri na-adịgide adịgide maka ọrụ e liri/n'ime mmiri. A na-akọwakarị ya makaNgwunye azụ okwute, HDD na-adọkpụ, ụzọ mmiri mmiri/ọnụ ọnụ, na ọnọdụ nrụnye ndị ọzọ siri ike.Ọnụ ego mkpuchi 3LPEtumadi dịgasị iche iche na ọkpọkọ OD / ogologo, mkpuchi mkpuchi chọrọ, ọkwa nkwadebe elu, ogo ule, yana njikwa / mbukota chọrọ. Iji tụnyere ndị na-ebubata ngwaahịa n'ụzọ ziri ezi, dowe otu ọkpụrụkpụ na ihe nlele nlele na RFQ.
• Ihe ndekọ Octal Pipe:nhọrọ 3LPE anyị na-emesi ikeelu adhesion, ezigbo mgbanwe, na ike mmetụta mgbochi, na ụdị ọkọnọ okeOD 88.9-1420 mmna otu ogologo8–18 m(ọrụ - dabere), yana ikike mkpuchi kwa afọ nkeruo 3,000,000 m².
• FBE: Otu - oyi akwa epoxy mkpuchi mara makaezigbo adhesion na mgbanwe. A na-ejikarị ya eme ihe maka yaakwa akwa, bends, na mpaghara nkwonkwo ubi, ma na-ejekwa ozi dị ka oyi akwa primer na multilayer sistem. E jiri ya tụnyere mkpuchi 3LPE, ọ na-enyekarịobere ihe mkpuchi igwen'okpuru oké backfill nchegbu na abrasion ikpughe.

3LPE Vs 3LPP

• 3 LPE: na-ejiPolyethylene (PE)dị ka mpụta oyi akwa, àjà a siri ike itule nke corrosion nchedo nan'ibu anwụ ngwa ngwan'ihi na ọtụtụ ndị e liri pipeline (ụdị okpomọkụ na-arụ ọrụ na-adabere na nkọwapụta ọrụ). Ọ bụ sistemu mkpuchi mpụga dị mma nke anakwere, ọnụ ahịa{1}.
• 3LPP: na-ejipolypropylene (PP)dị ka elu oyi akwa, na-enyeelu okpomọkụ iguzogidena isi ike ka mma tụnyere PE. A na-ahọrọkarị ya makaahịrị ọrụ ọkụ, ụzọ ọzara, na oru ngo nwere ihe chọrọ ịgba ígwè siri ike.

Na omume

• 3 LPEa na-ahọrọ ma ọ bụrụ na ihe ize ndụ mebiri emebi dị elu (abrasion/mmetụta/mmetụta ala, HDD, mmiri mmiri ma ọ bụ ala ike).
• FBEa na-ejikarị eme ihe ebe mgbanwe na ihe nhazi dị mfe (ihe ntinye, bends, nkwonkwo ubi).
• 3LPPa na-atụle ma ọ bụrụ na achọrọ ọrụ okpomọkụ dị elu ma ọ bụ arụmọrụ okpomọkụ siri ike.
•  

• Nkwadebe elu: ihicha ihe mgbawa na profaịlụ elu akwadoro iji zute usoro mkpuchi (dị ka akọwapụtara).
• FBE oyi akwa: Ngwa nwere njikwa ọgwụgwọ iji mepụta ntọala primer.
• Ngwunye nrapado: A na-achịkwa agbaze / na-asọba na njikọ FBE na PE.
• PE topcoat: oyi akwa extruded maka nchekwa igwe na mgbochi mmiri.
• Nyocha: Nlele ịdị arọ, nchọpụta ezumike, na nnwale adhesionmgbe akọwapụtara na PO/ITP, ewepụtara dị ka ndekọ maka ịnata.

Anyị3LPE mkpuchi ọkpọkọA na-ekpebi ịrụ ọrụ n'ahịrị mkpuchi - karịsịa site na otu anyị si ejikwaNkwadebe elu igwe, okpomọkụ igwe, ngwa ntụ ntụ, na nkwụsi ike extrusion. Ya mere, anyị na-agba ọsọ a zuru ezu 3-layer usoro na raara onwe ya nye ọdụ makaFBE ntụ ntụ mkpuchi, copolymer nrapado njikọ, napolyethylene mpụta jakete guzobere, ya mere mkpuchi ahụ na-anọgide na-agbanwe agbanwe n'ogologo mmepụta na-agba ọsọ.

Ihe ndị bụ isi anyị na-eji na ahịrị

• FBE epoxy ntụ ntụ (okpukpu mbụ):etinyere ya site na nfesa electrostatic n'elu igwe kpo oku nke ọma iji mepụta corrosion siri ike{0}} ntọala na-eguzogide.
• Ihe nrapado copolymer (okpukpu etiti):na-etolite akwa njikọ dị n'etiti epoxy na PE, na-eme ka adhesion na-arụ ọrụ ogologo oge-.
• Polyethylene (PE) granules (mpụta oyi akwa):extruded dị ka jaket nchebe iji guzogide mmetụta, abrasion, na mmiri mmiri na-abanye n'ime ọrụ eli / n'ime mmiri.

Isi akụrụngwa & ọdụ usoro

• Nkwadebe & ihicha elu:agbawa agbawa, iwepụ uzuzu na njikwa ọnọdụ elu{0} n'ihi na mkpuchi mkpuchi na-amalite site na profaịlụ igwe na ịdị ọcha.
• Sistemụ kpo oku induction:na-ekpo ọkụ ọkpọkọ na oke mkpuchi mkpuchi achọrọ ma na-edobe okpomọkụ kwụsie ike tupu ịgbasa ntụ ntụ.
• Ụlọ ịgbasa ntụ ntụ FBE:ngwa electrostatic ntụ ntụ na-achịkwa ihe nkiri ewu; A na-ejikwa njikwa ntụ ntụ / mgbake mee ka mkpuchi kwụsie ike ma belata ihe mkpofu.
• Adhesive + PE extrusion mkpuchi ngalaba:usoro extrusion na-etinye akwa mkpuchi na jaket PE na usoro a na-achịkwa, na-aga n'ihu (ọsọ na nkwụsi ike gbazee bụ isi ebe a).
• Mpaghara oyi na imecha:jụrụ oyi na-achịkwa iji kpọchie iguzosi ike n'ezi ihe mkpuchi, gbakwunyere nkwadebe mbelata dị ka ọrụ a chọrọ.
• Nyocha n'ịntanetị:Enwere ike itinye nyocha nke ọkpụrụkpụ na nchọpụta ezumike n'ime usoro ọrụ ka a na-ahụ ntụpọ n'oge, ọ bụghị mgbe ebukọchara.

Ekwesịrị ijikọ ọkpụrụkpụ mkpuchi 3LPE na njikwa ihe egwu (dọrọ{1}}in/rocky backfill) na gburugburu ọrụ, ọ bụghị ahọpụtara dị ka "otu nọmba dabara niile.

NaỌkpụkpọ Octal, anyị dobe anyị3LPE mkpuchi ọkpọkọmaka oru ngo ebe ndị na-azụ ahịa na-eche banyere ihe abụọ kachasị:nrụnye mmebi ihe ize ndụnaOgologo oge - Ọnụ okirikiri ndụ. A na-akọwakarị mkpuchi octal pipe 3LPE maka ụzọ okpomọkụ dị ala na ọnọdụ nrụnye siri ike n'ihi na ọ na-ejikọta.elu adhesion, ezigbo mgbanwe, na ike mmetụta mgbochi, na ike ọkọnọ na-akwadoruo 3,000,000 m² / afọikike mkpuchi.

• Ogologo -Pịpụ ikuku na-ebufe mmanụ dị anya

Nke a bụ ebe ndị otu ịzụrụ ihe na-echegbu onwe haụzọ mgbagwoju anya(akwa ntu oyi, ala mmiri mmiri, ogologo ịkwọ ụgbọ mmiri, HDD/ ngafe osimiri) nannabata - nke ato.
anyị na-elekwasị anya na mkpuchi mkpuchi nke na-enyere aka belata ịrụ ọrụ ubi{0}}nguzogide mmebi n'ibu + ike adhesion{{0}ma anyị nwere ike hazie ihe mkpuchi chọrọ n'ụkpụrụ nkịtị (ọrụ - dabere), nke na-eme ka nyocha na inyefe dị nro.

• Pipeline na-ebufe mmiri & ikpo ọkpọkọ

A na-ahazikarị ọrụ ndị a{0}} na ebugharị na olu{1}, ndị na-azụ ahịa na-eche banyere yamkpuchi mkpuchi n'oge njikwa / nchịkọtanannyefe kwụsiri ikemaka nrụnye na-aga n'ihu.
Ọkpụkpọ Octal3LPE na-enye ihe mgbochi mpụga siri ike maka ikpughe / ikpughe mmiri, na ikike mmepụta anyị na-enyere ndị na-azụ ahịa aka ibelata ihe egwu ọkọnọ n'oge windo ihe owuwu kacha elu.

• Chemical & Slurry (Mineral Pulp) Ụgbọ njem Pipelines

Ahịrị ndị a na-agakarị na mpaghara ụlọ ọrụ mmepụta ihe ma ọ bụ saịtị ndị siri ike, ebe ezigbo ihe ịma aka bụogologo oge - ntụkwasị obima na-ezere mmechi nke mmebi nke mpụga ma ọ bụ mkpuchi mkpuchi kpatara n'oge echichi.
Ihe kpatara 3LPE anyị ji dabara:Emebere ọkpọkọ 3LPE anyị iji gbasaa ndụ ọrụ ma belata ọnụ ahịa ọrụ site na ijikọta nchebe corrosion nammetụta dị elu / nnabata abrasion- bara uru mgbe ọnọdụ nrụnye siri ike.

Kpọtụrụ ugbu a

FAQ

 

 

Gịnị bụ ahụkarị3LPE mkpuchi ọkpụrụkpụ(DIN 30670 / ISO 21809-1)?

3LPE mkpuchi ọkpụrụkpụakọwapụtara site na ọkọlọtọ oru ngo na nha pipụ.DIN 30670na-enyekarị DN{0}} ntụzịaka ọkpụrụkpụ kacha nta dabere (dịka ọmụmaatụ, DN Obere ma ọ bụ nhata 100: 1.8 mm ruo DN Karịrị ma ọ bụ nhata 800: 3.0 mm), wee detuo a+0.7 mm arọ{1}}ọrụmụbaa ebe nrụgide n'ibu dị elu.ISO 21809-1na-eji echiche klaasị ọkpụrụkpụ ma kọwaa ihe achọrọ maka ihe ọkụkụ - etinyere ihe mkpuchi PE/PP 3-layer.

3LPE vs 3LPP: kedu ihe dị iche?

Isi ihe dị iche bụelu oyi akwa ihe: 3LPE na-eji polyethylene (PE), mgbe3LPP na-eji polypropylene (PP). A na-ahọrọ PP mgbe achọrọ ike ịrụ ọrụ dị elu, ebe a na-eji 3LPE eme ihe maka pipeline lie / submerged ebe achọrọ ogologo oge na nchebe corrosion.

Keduuleachọrọ maka3LPE mkpuchi ọkpọkọnnabata?

Nnwale nnabata a na-ahụkarị maka3LPE mkpuchi ọkpọkọgụnyeremkpuchi ọkpụrụkpụ nha, nchọpụta ezumike, bee ike, mmetụta iguzogide, nankwụsị nke cathodic(obosara dabere na nkọwapụta ọrụ).

Asambodo

 

Asambodo CE

Asambodo ISO 9001

Asambodo API Q1

Asambodo ABS

Asambodo AP-5L

Asambodo API-5CT

 

Ihe nchịkọta dị ọkụ: 3lpe mkpuchi ọkpọkọ, China 3lpe mkpuchi ọkpọkọ na-emepụta, ndị na-ebu, ụlọ ọrụ